Find the failing layer before changing anything. Troubliq’s tools turn a vague smart-home symptom into a smaller, testable problem. Begin with the tool closest to what you see, record each result, and change only one thing at a time.
Start with the new Error Decoder
Paste a sanitized error fragment into the Home Assistant Error Decoder. Matching happens privately in your browser and routes the message to the closest problem-specific guide.
Diagnostic tools
- Home Assistant Log Sanitizer: remove common secrets, addresses and identifiers locally before sharing a log.
- Home Assistant Error Decoder: match Home Assistant, Zigbee, Matter, MQTT, ESPHome, Z-Wave and integration messages.
- Device Unavailable Diagnostic: isolate power, native control, network, integration, entity and automation failures.
- Current Problems & Integration Health: check protocol, controller, integration, firmware and version-sensitive limitations.
- Diagnostic Decision Tree: use the complete general-purpose recovery ladder.
Safe-use rules
- Save a current backup before destructive recovery.
- Do not paste passwords, tokens, pairing codes, backup keys, certificates, exact addresses or unreviewed diagnostic archives.
- Prefer observation and reversible checks before deletion, re-pairing, firmware changes or factory reset.
- Stop for heat, smoke, arcing, battery swelling, gas, water near electricity, insecure locks or failed life-safety equipment.
Privacy: these browser-based decision aids do not require account credentials or private Home Assistant uploads.
Last reviewed: September 21, 2026.